LS Motor Controller VFD 3-Ph. 11.0KW/15HP, SV110iP5A-4

Cooling method

Forced air cooling (Self-cooling for below 1.5KW-2, 2.2kW-4)

Control

Control Method

V/F, Sensorless Vector, Slip Compensation, Easy Start Selectable

Frequency Setting Resolution

Digital Reference: 0.01 Hz (Below 100 Hz), 0.1 Hz (Over 100 Hz)

Analog Reference: 0.01 Hz / 60 Hz

Frequency Accuracy

Digital : 0.01% of the max frequency

Analog : 0.1% of the max frequency

V/F Pattern

Linear, Squared Pattern, User V/F

Overload Capacity

110% per 1 min, 120% 1 min

Torque Boost

Manual Torque Boost (0~ 15%), Auto Torque Boost

Operation Method

Kepad/ Terminal/ Communication Operation

Operation

Frequency Setting

Analog: 0~12V / -12V / 0~20mA/ Pulse / Ext-PID

Digital: Keypad

Input Signal

Start Signal

Forward, Reverse

Multi- Step

Up to 18 Speeds can be set including Job (Use Programmable Digital Input Terminal, Including Jog/Dwell

Multi Step Accel/Decel Time

0.1~ 6,000 sec, Max 4 types can be set via Multi- Function Terminal. Accel/Decel Pattern: Liner, U-Curve, S-Curve Selectable

Emergency Stop

Interrupts the Output of Drive

Jog

Jog Operation

Fault Reset

Fault Reset

Output Signal

Operating Status

Frequency Detection Level, Overload Alarm, Stalling, Over Voltage, Drive Overheating/Running/ Stopping/ Const ant running, Drive By-Pass, Speed Searching

Fault Output

Contact Output (3A, 3C, 3B) - AC 250V 1A, DC 30V 1A

Indicator

Choose 2 from Output Frequency, Output Current, Output Voltage, DC Link Voltage (Output Voltage: 0~ 10V

Operation Function

DC Braking, Frequency Limit, Frequency Jump, 2nd Function, Slip Compensation, Reverse Rotation Prevention, Auto Restart, Invert By-Pass Auto- Tuning PID Contral Start Stop Braking leakage Pre-PID Dual- PID MMC Start Prer By Pass, Auto Tuning, Control, Flying Start, Safety Stop, Flux Braking, Low leakage,Pre PID, Dual PID, MMC, Eay Start, e-heater

Protection

Drive Trip

Over Voltage, Low Voltage, Over Current, Ground Fault, Drive Overheat, Motor Overheat, Output Phase Open, Overload Protection, External Fault 1, 2 , Communication Error, Loss of Speed Command, Hardware Fault, Option Fault etc

Drive Alarm

Stall Prevention, Overload Alarm, Thermal Sensor Fault

Display

Keypad

Operation Information

Output Frequency, Output Current, Output Voltage, Frequency Set Value, Operating Speed, DC Voltage, Integrating Wattmeter, Fan ON time, Run-time, Last Trip Time

Trip Information

Trip Indication when the Protection Function activates

Max. 5 Faults are saved.

Last Trip Time

Environment

Ambient Temperature

-10 °C ~ 50 °C  ( 14 °F ~ 122 °F )

Decrease 2% of rated current for every 1 °C increase in above 40 °C

Storage Temperature

-20 °C ~ 65 °C  ( 14  °F ~ 149  °F )

Ambient Humidity

Below 90 % RH Max. (Non-Condening)

Altitude-Vibration

Below 1,000m (3,300ft), Below 5.9/sec (0.6g)

Application Site

Pollution degree 2, No Corrosive Gas, Combustible Gas,Oil Mist, or Dust